If you’re a home owner unfamiliar with plumbing, you’re probably familiar with the experience of being charged an arm and a leg for what seems like a simple plumbing repair. If you’d like to avoid this experience again, read on for some advice and tips on how to fix your own plumbing.
If you are paying someone else to do the plumbing in your home be sure that they are licensed in your state to do that work. Some people who have little or no knowledge of plumbing will try to pass themselves off as a pro. So you can see the importance of checking to see if your plumber is licensed. You should also see if you can find positive testimonials about the plumbers work.
Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.
Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.
If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.
If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.
Plumbing isn’t as hard as it can seem, when you have access to good information and advice about how to go about solving your own plumbing problems. Next time you have md sewer plumbing problems in your house, try applying the tips from this article and see if you can save some money by solving it yourself!